Emergency Geze Automatic Swing Door Repair – Department of Biochemistry, University of Oxford

emergency automatic swing door repair oxford

We are asked to attend a same day response emergency call out to the Department of Biochemistry for the University of Oxford.

 We deployed our yellow safety barriers to designate a safe working area and investigated the reported faults. It was apparent that the on-door safety sensors were detecting so it would not allow the door to open fully.

This was due to newly installed trees on the roof terrace where the doors were located. The BEA Flatscan sensors were detecting the tress as if it was a person close to the door who could have been at risk, hence why the door stopped.

 The trees were in large pots so we could relocate them out of the detection zone easily. We reset the operator and recalibrated the sensors with our test box to ensure the correct detection.

The system was tested with the access control system and electric locking, cleaned and left in working order.

FAQs

My automatic door is not closing, can you help?
Yes of course, but be aware we cover Oxfordshire, Cambridgeshire, Essex and Peterborough, but if you are in adjoining counties, please call us, we may be able to help. Also depending on the severity of your problem we may be able to offer a same day response.

 What should I check if my automatic door is not closing?

At your automatic door please check the following –

  •  Is it in the correct setting, i.e. auto / 2 way?
  • If you change the setting to closed, does it close?
  • Is there an error code or sequence of flashing lights on the display?
  • Is the power on?
  • Walk to the door and do the sensors above you light up?
  • Is there anything in the doorway to stop them closing?

 If you have checked and still not operating, then contact us now

Why do automatic swing door safety sensors detect plants, trees and flowers?
  • Universal Detection: Sensors use active infrared, radar, or laser technology to look for changes in light reflection, radio waves, or physical presence.
  • Solid Obstruction: A tree trunk, large branch, or dense foliage blocks infrared beams or reflects signals just like a human body or shopping trolley.
  • Swaying Movement: Motion-activated sensors notice leaves or branches moving in the wind, treating that shifting environment as an approaching user.
  • No Intelligence: A sensor acts as a basic safety trigger; it only knows something is in the way, not what it is and as a default gives a safety signal.
Can I use BH Doors without a service contract agreement?
Yes of course, but be aware that your call out / hourly rate will be higher than a contract customer. Also depending on the type of equipment, this may need to be serviced as part of compliance and health and safety legislation, ask us for a free survey and quotation.

For automatic doors as an example the minimum for compliance to BSEN16005 and BS7036 2014 is once per year and a risk assessment checklist document issued.

The manufacturers may specify when service parts are replaced due to the number of operations, so you may need to increase the amount of service visits and replacement of parts to ensure the safe and continued operation.

For Geze Slimdrive EMD operators for compliance and your building insurance they need to be tested, serviced and inspected at least twice per year with a checklist document issued.