Aluminium Door Repair For Office in Oxford

Today we repaired the main entrance aluminium doors at M40 offices, Oxfordshire as they did not close fully onto the electronic maglocks causing a security issue.

On initial inspection we found that the transom closer had failed and the drive arm badly worn. This required removal of the door to allow us to remove the items. We carried out a risk assessment and deployed our yellow men barriers to designate a safe working area, but also still allowing access to the building.

With the new Axim 99 transom closer and mechanical parts replaced we refitted the door and aligned the maglock to ensure when the door was opened it automatically closed and the lock engaged. The doors were tested for opening and closing, adjusting the Axim door closers for a smooth closing action. We also tested the manual locks, cleaned the doors and frame completing the repair.

If you have a problem with your door then call 0808 1200911 or request an engineer here